view cart menu separator categories menu separator faq
advanced search
categories  > Frame Sliders (72)
Pro-tek Frame Slider No Cut Protector Suzuki 2001 2002 GSXR1000 GSXR-1000 Black
 

Pro-tek Frame Slider No Cut Protector Suzuki 2001 2002 GSXR1000 GSXR-1000 Black

Price: $50.00 add to cart     
Feedback: -74.76%, 31 sales Ask seller a question
Shipping: US-Mainland: $7.00 (more destinations)
Condition: Brand new
Payment Options:
-or-
Pro-tek frame sliders are made from an acetal resin for strength and durability. Helps protect your frame from nasty spills and tip overs. No modifications of fairing. Comes complete with instructions for easy installation.
Comes with all mounting hardware. Normally retail for $109.95

Frame sliders are not designed to protect the plastics, rearsets (footpegs), or clipons (handlebars). They are designed to absorb the impact and energy of a fall so that you don't damage your engine or frame. Those two parts of the bike are critical components for racers and an insurance company as they will often total your bike if those are damaged.

Frame sliders come in two basic models which are cut or no cut frame sliders. A cut frame slider means that you have to cut your plastics to be able to bolt that type of frame slider on to your bike. No cuts obviously mean you do not have to cut a hole in your plastics. We like each model to have to cut a 2" hole in your plastics and other kits with no modifications you do not have to cut anything. The no cut kit normally has brackets that you mount up below your plastics that then go to a place where there are no plastics then you bolt on the slider to that plate. Basically the plate lets you relocate where the slider will bolt on. No cut sliders are also more expensive.

Now for quick bullet points about sliders:
1. They are not designed to protect plastics, clipons, or rearsets, even though they might help sometimes.
2. You do not want a slider to stick out too far or it will help flip your bike in a crash by snagging on the ground, curb or anything else.
3. You want delrin or plastic to touch down when you crash as they will grind off and not catch on anything and if hit hard enough or direct enough they will shatter.
4. If your slider shatters, grinds off or bends then it did it's job. You don't want it solid after a crash or it didn't absorb any energy but merely transfered it on to what you bolted it to.
5. When f1 cars hit the side of a track they explode as they don't want the drive to absorb the energy. Frame sliders are the same way. You want them to stay attached but get beat up and take the energy.
6. If the bolt on a frame slider bends that's a good thing as the only other option is to put the energy on the frame or mounting point. Better the bolt bends. Also if it didn't bend it might have flip the bike by snagging something. A mangled frame slider, but still on the bike, did it's job.
7. No cut frame sliders aren't a direct bolt on like cut sliders as they often have a bracket.

We hope this information was helpful and if you have anything to add or questions then feel free to contact us. Ride safe and hope you never have to use your frame sliders.

Suzuki

'01-'02 GSXR1000

The frame sliders are to be mounted to your upper engine mount bolts. Refer to your service manual before performing this installation. Before beginning, make sure pinch bolts are tight to prevent any engine movement. Remove right side engine mount bolt and install notched slider with supplied 10mm x 1.25 x 90mm bolt. Remove left side engine mount bolt and
install mounting bracket. Use the supplied 10mm x 1.25 x 70mm bolt. Install slider into bracket with the 10mm x 1.5 x 30mm bolt. Always torque bolts to factory specifications.

Includes: (2) Acetal pucks with aluminum bushings
(1) Aluminum mount bracket
(1) 10mm x 1.25 x 90mm bolt (long puck and right side)
(1) 10mm x 1.25 x 70mm bolt (bracket through bolt)
(1) 10mm x 1.5 x 30mm bolt (attach flat puck to bracket)
Other Products from gottheparts10:View all products
Pro-tek Dark Smoke Windscreen Yamaha 2006 2007 2008 2009 YZF-R6S R-6S WS-125
$40.00
Pro-tek Frame Slider Protector Yamaha 2002 2003 YZF R1 YZF-R1 R1 R-1 Black
$30.00
Pro-tek Swing Arm Spool Slider Hyosung 2004 2005 2006 2007 2008 GT650 EFI Black SAS-18K
$17.00
Pro-tek Swing Arm Spool Slider Honda 2007 2008 2009 2010 2011 2012 RS125 RS-125 SAS-20W White
$17.00
Pro-tek Swing Arm Spool Slider Yamaha 2009 2010 2011 2012 2013 2014 2015 VMax 1700 White SAS-45W
$17.00
Pro-tek Dark Smoke Windscreen Kawasaki 2000 2001 2002 Ninja ZX6R ZX600J WS-15
$40.00
Pro-tek Dark Smoke Windscreen Kawasaki 2003 2004 2005 2006 Z1000 Z-1000 WS-155
$40.00
Pro-tek Swing Arm Spool Slider Suzuki 1997 1998 1999 2000 2001 2002 2003 TL1000S/R SAS-20W White
$17.00
Pro-tek Dark Smoke Windscreen Kawasaki 2000 2001 2002 2003 Ninja ZX9R ZX-9R WS-20
$40.00
Pro-tek Swing Arm Spool Slider Kawasaki 1989 1990 1991 1992 1993 1994 Ninja ZX7R ZX7RR White SAS-10W
$17.00
Last Updated: 20 May 2016 07:41:19 PDT home  |  about  |  terms  |  contact
Powered by eCRATER - a free online store builder